Gerband Winflex I Reveal Tape 100mm X 40m (pink)

Winflex-I as quick to apply and very reliable product, can be as well used at ground floor to walls junctions and has a high vapour resistance according to ENEV, DIN 4108-7. Furthermore ? you may bond our Airtight Window Tape to porous and rough surfaces such as bricks, blocks, concrete and wood. You can also plaster it over, making it ideal for masonry construction. It has a 15mm adhesive strip to adhere to the window or door Due to its special construction, the tape is flexible in crosswise direction. This allows it to optimally absorb movements within the building and ensures a permanent airtightness seal. The bonding between the Winflex-I and internal reveal can be sealed permanently and reliably with PHS Ottello sealant.

Winflex-I interior sealing tapes offer the following advantages:

• Its flexibility in crosswise direction they compensate for any building movements.
• Provides a permanent vapour and airtight seal.
• You can plaster it or paint over.
• Contain no solvents, either on the adhesive strip on the seal or in the sealants.
• Offer significant savings due to time advantages.
• Compatibility with acrylic glass and polycarbonates.
• Provides high adhesion of the sealing strip on all types of window frame.

Application:

• Remove any window protective foil, and wipe the frame with a solvent to remove any undesirable surface residues.
• Measure the required length of tape.
• Remove the adhesive liner and apply tape adhesive strip neatly to the window frame.
• While ensuring sufficient stress relief of the tape, identify where the other side of the tape will finish on the reveal.
• Apply a 6mm bead of sealant (PHS Ottello Sealant) to the reveal.
• Additional thickness may be required if the block work is especially rough.
• Where the tape is being plastered over, additional sealant should be applied to ensure no movement of the tape.
• Gently press the tape against sealant and allow to cure.